PRODUCTS >> DRILLING FLUIDS & OIL WELL >> Consistometer / Thickening Time

HTHP Consistometer, Double Cells,Model RHC-8040

Date:2020-05-10 13:51:37 Clicks:225
HTHP Consistometer, Double Cells,Model RHC-8040

Thickening Time TestsThickening time of a slurry is calculated to determine the time required to mix and pump the slurry. Mixing time for the volume is estimated from calculated slurry volume and mixing rate. Mixing rate varies from rig to rig, and is dependent on slurry design. Safety time is allowed to account for any shut down or slow mixing rates that may inadvertently occur.HPHT ConsistometerThe High-Pressure, High-Temperature (HPHT) Consistometer measures cement slurry viscosity or consistency under elevated pressure and temperature conditions. Its primary function is to determine the maximum available pumping time of a cement slurry before the slurry reaches an un-pumpable consistency before setting. While designed for cement slurries, the effects of pressure, time and temperature can also be observed for other fluids, emulsions, dispersions, or slurries under static or dynamic conditions.OperationThe HPHT Consistometer exposes a cement slurry sample to a controlled set of parameters of temperature, agitation and pressure that simulate the down-hole conditions. During a test, these parameters are carefully monitored and precisely controlled by the system software.The data is automatically recorded to a database for future analysis to help predict the cement slurry’s down-hole performance.SoftwareThe HPHT Consistometer Control Software is the next generation of complete and powerful system control software with a simple and friendly, flexible user interface.Friendly and Flexible User InterfaceInstrument calibration results are reviewable/printable with Data ManagerBasic FeaturesTemperature up to 600°F (315° C)Pressure to 40,000 psig (275 MPa)Slurry cup rotation - 150 RPM per API specificationsMetal-to-Metal pressure chamber closure - ease of operation, less maintenancePressure chamber cooling coils - fast cool-down, quick cleanupCeramic-insulated electrical connections through pressure chambeSXalibration routines:PressureTemperatureBc*Cooling capability:Allows for low temperature test (external chiller required)Cooling can be made part of test sequenceCustomizable hesitation squeeze:Separate user controlled motor On/Off timesFast update rate and event recording:Triggered by Bc values or elapssed timeUser friendly graphs:Simultaneous charting of oil and slurry temperaturesSelectively view or hide chartsMarker to read any value on graph.User can turn it on or offImproved pressure controlImproved life of pressure control valve with addition of hardwareBetter pressure control of the target pressureAdditional filtering improves reliability of hydraulics*Bc-Bearden units of Consistency-units used to express the consistency of a cement slurry when determined on a pressurized consistometer.

High-Pressure, High-Temperature Consistometer  Specifications

Part No.

Model

Description & Technical Parameters

Remark

7720

RHC-7720

Maximum operating temperature of  400 ℉(204.4℃)

UNIT Working pressure : 20,000psi (1380 kPa)

Temperature is maintained via a PID controller 0-100Bearden

Slurry container rotational speed is 150 RPM per API specifications

220-Volt, 50/60 Hz, 4 KVA power source,25 Amp electrical power supply

Size:37.4 × 29.5 × 21.6 inches (95 × 75 × 55 cm)

Create Weight:330 lb (150kg)

 

8020

RHC-8020

Maximum operating temperature of 600 ℉ (315.5℃)

UNIT working pressure: 40000 psi (275,800 kPa)

Temperature is maintained via a PID controller 0-100Bearden

Slurry container rotational speed is 150 RPM per API specifications

Single cell

220-Volt, 50/60 Hz, 7.5 KVA power source,30 Amp electrical power supply

Size:65.4 × 19.3 × 37.4 inches (166 × 79 × 95 cm)

Create Weight:1500 lb (680kg)

 

8040

RHC-8040

Maximum operating temperature of 600 ℉ (315.5℃)

UNIT working pressure: 40000 psi (275,800 kPa)

Temperature is maintained via a PID controller 0-100Bearden

Slurry container rotational speed is 150 RPM per API specifications

Double cells

220-Volt, 50/60 Hz, 7.5 KVA power source,30 Amp electrical power supply

Size:65.4 × 19.3 × 49.2 inches (166 × 79 × 125 cm)

Create Weight:2398 lb (1090kg)

 

贵州快三一定牛今天开奖结果